• CBM Supervisor

    at Dietsmann

    March 2019 - at Present


    * Monitor and manage the condition and performance of all rotating machineries and equipment from Mellitah Oil & Gas Plant, ensuring optimal performance to support plant operations. * Supervise periodical condition monitoring and verification checks on various mechanical equipment using on-line and off-line Equipment Condition Monitoring System and report any abnormalities. * Vibration measurements: Set up of vibration monitoring databases. Collect or co-ordinate the collection of quality vibration data from rotating machinery according to the defined lists and any ad-hoc schedules as identified/requested. * Identify needs for maintenance and overhaul of rotating equipment based on condition monitoring, and issue Work Order Requests to Planning Department. * Receive, investigate, and resolve complains related to performance or condition of rotating equipment and give proper recommendations. * Continuous improvement of the monitoring strategy and the use of equipment.

  • Senior Testing and Inspection Engineer

    at Saline Water Conversion Corporation

    April 2016 - March 2019

    Al Jawf

    * Inspection of static and rotary equipment during routine maintenance, corrective maintenance, breakdown maintenance and some equipment in service. * Reliability Condition Monitoring-routine collection of vibration data of the rotating equipment, during its operation, analyse and report with recommendations for corrective actions. * Field balancing: In site balancing of rotating equipment wherever feasible. * On-line Condition Monitoring System for critical rotating equipment (Steam Turbine; Gas Turbine; Pumps; etc.) * Supervising hydrostatic and leak tests and record the test results. * Initiate Work Requests to all concerned maintenance sections based on the recommendations given in the T&I Report. * Report condition of equipment and recommend maintenance actions to restore the target condition of equipment or avoid future failure. * Support top management with technical reports, act as specialist, internal adviser or consultant and help in decision making.

  • Predictive Maintenance Engineer

    at Complexul Energetic Oltenia

    September 2006 - February 2016


    * Developing the Condition Monitoring System (CMS) * Equipment audit to determine which machines should be tested and test frequency, according to criticality and failure modes, technologies used, and standard test conditions. * Setting up the database: naming machines and points, organizing the machines and points, creating routes, generating reports. * Developing technical tender documentation for special tools acquisition (Vibration Data Collector; Thermal Camera; Oil Analysis; Ultrasounds) * Responsible for data acquisition, analysis and reporting using different special tools and software (Emerson CSI 2140; Bruel & Kjaer Vibrotest 60; SPM Leonova Infinity; Pruftechnick Vibexpert). * On-line Condition Monitoring System for Steam Turbine and other critical equipment (System 1-Bently Nevada) * Coordination and supervision of shaft alignment work using laser line kit. * Rotors static and dynamic balancing. * Thermography Inspection. * Tribology. * Root Cause Analysis (RCA).


  • Vibration analyst CAT III

    at Mobius Institute

    2016 - 2016 (1 year) Al Jawf

  • Quality Control

    at University of Petrosani

    2006 - 2008 (2 years) Hunedoara

  • Bachelor Degree

    at Universitatea din Petrosani

    2001 - 2006 (5 years) Hunedoara

  • Mechanical Engineer

    at University of Petrosani

    2001 - 2006 (5 years) Hunedoara


  • Romanian Native

  • English Negotiation