My name is Mohamed Fadhil, currently works as a Process Engineer with a Master’s Degree in Chemical Engineering (Research). I have a total of 3 years of working experience specializing in wet & dry etching (plasma), solder mask ink print and curing, PVD & CVD.


  • Process Engineer

    at QDOS Interconnect Sdn Bhd

    May 2017 - at Present

    Pulau Pinang

    QDOS is a semiconductor company manufacturing substrate (MIS – Molded Interconnect Substrate). - Responsible for dry etch process (plasma etch) and wet etching processes such as Ferric Chloride Etching, Cupric Chloride Etching, Selective Ferrum Etch and Alkaline Micro Etch. - Responsible for dry film stripping process and semi-additive process (SAP). - Responsible for substrate screen printing and baking process. - Writes documents such as work instructions (WI), white paper, control plan, PFMEA, OCAP, 8D report, DMAIC, PDCA and fishbone analysis. - Experience in using failure analysis (FA) tools such as SEM-EDS, cross-section machine (grind & polish), visual and measuring scope. PROJECTS INVOLVED:- - Setup schedule waste system for a new factory - Automation for loader/ unloader system for new equipment - Auto dosing system for etching/ stripping machine - Raw material cost down - New equipment buy off & setup

  • Process & Equipment Engineer

    at TS Solartech Sdn Bhd

    January 2016 - April 2017

    Pulau Pinang

    TS Solartech is a solar wafer manufacturing company. - Responsible for the following process: wafer inspection system, texturizing, POCl3 diffusion, etching, chemical vapor diffusion (CVD), printing and fast firing furnace (FFF). - Responsible for solar cell process optimization. Provide technical support for manufacturing, improving product quality, optimizing process parameters to improve PV conversion efficiency. - Involved in continuous improvement for failure rate improvement, cost/ waste reduction, meeting yield goals through researching and exploring the latest manufacturing equipment or processes. - Provide technical assistance in the installation and maintenance of company equipment. - Analyses equipment malfunctions and failures and accordingly develop corrective actions. - Provide job assistance and conduct job training for employees as needed. - Documents manufacturing instructions, control plan and PFMEA to maintain the highest product and process quality.


  • M. Eng. (Hons) in Chemical Engineering (Research Mode)

    at Universiti Sains Malaysia

    2017 - 2018 (1 year) Pulau Pinang

  • B. Eng. (Hons) in Chemical Engineering (Research Mode)

    at Universiti Sains Malaysia

    2012 - 2016 (4 years) Pulau Pinang