logoSign upLog in
Sam Garcia

Sam Garcia

To Banana Pro13/01/2016

Hardware Specification of Banana ProTM

SoC

Allwinner® A20(sun 7i)

CPU

ARM® Cortex™-A7 Dual-Core (ARM v7 instruction set)

GPU

Mali400MP2 , supproting OpenGL ES 2.0/1.1(hardware acceleration support)

RAM

1GB DDR3 SDRAM (shared with GPU)

PMU

AXP209

Features

Storage

MicroSD (TF) card slot

SATA 2.0 (suggest 2.5 inch SSD or HDD)

Ethernet Port

10/100/1000Mbps ethernet (Realtek RTL8211E/D)

Wireless

WiFi 802.11 b/g/n 2.4GHz

1 x IR receiver

USB

2 x USB2.0 Host

1 x USB 2.0 OTG (all direct from A20 chip)

Display

Supports multi-channel HD display:

1 x HDMI 1.4 (Type A - full)

1 x LVDS/RGB/CPU display interface (DSI) for raw LCD panels

Composite video (PAL and NTSC) (via 3.5 mm TRRS jack shared with audio out)

HDMI resolutions from 640×480 to 1920×1080 plus various PAL and NTSC standards

Audio

HDMI output

Analog audio (via 3.5 mm TRRS jack shared with composite video out)

I2S audio (also potentially for audio input)

1 x On-board micphone for audio input

Camera

1 x Parallel 8-bit camera interface

EXPANSION INTERFACE

40 Pins Header:

28×GPIO, some of which can be used for specific functions including UART, I2C, SPI, PWM, CAN, I2S, SPDIF.



LED

1 x Power status led (red)

1 x User defined led1 (green)

1 x User defined led2 (blue)

Button

1 x Reset button

1 x Power button

1 x U-boot button

Power Source

5V @ 2A via MicroUSB

OS Support

Android 4.2(4.4)/ Linux

Appearance characteristic

Sizes

92mm × 60mm

Weight

45g

Banana Pro TM and Banana PiTM are trademarks of LeMaker

Sam Garcia
Relevant