Experience

  • Drilling Fluids Specialist

    at Schlumberger

    February 2015 - March 2016

    Abū Z̧aby

    Details: Working as Lead Mud Engineer on Sarb North Artificial Island & Jack-Up rigs offshore Abu Dhabi; Extended Reach Drilling Wells with Max 3% (30,000ppm) H2S Client: ADMA-OPCO, a subsidiary of ADNOC

  • Drilling Fluids Project Engineer

    at M-I SWACO

    January 2013 - January 2015

    Sindh

    As Project Engineers of Drilling & Completion Fluids, my jobs involve Technical Management as following: Select and evaluate the drilling & completion fluids; Ensure the drilling fluids proposal to be executed at rig sites by mud engineers; Make recommendations to optimize the Drilling Fluid for hole cleaning / stability, surge/swab and circulating. Make recommendations for curing Drilling Fluids losses in different situations. Main role is for the technical sales and support to the client’s operation meanwhile supervise the daily fluids operation execution at rig site. Study and work in lab for drilling fluids formulation optimization. Prepare and review end of well drilling fluids recaps and reports. Manage engineers’ technical training and career development, train the engineers as instructor. Evaluate engineers work performance. Regular rig visits for fluids QC&QA control. Monitor, track, close all drilling fluids service quality issues and reports.

  • Drilling Fluids Project Engineer / Specialis

    at M-I SWACO

    November 2004 - November 2012

    Guangdong Sheng

    1.Project Engineer (Drilling Fluids) for CNPC / PetroChina HTHP Wells in Tarim Basin (5 Months) 2.Deepwater Drilling Fluids Engineer / Project Engineer for Husky Deepwater Project (4 Years), Water Depth= ~5,740ft. 3.Deepwater Drilling Fluids Specialist on Diamond Ocean Start Deepwater Rig in Gulf of Mexico for Plains Exploration & Production (3 Months) 4.Mud Engineer for Devon Energy Deepwater well in South China Sea (4 Months) 5.Drilling Fluids Engineer for Weatherford Integrated Drilling Services to drill the gas well with sidetrack at 19,096ft (milling window on the liner) slim hole, high content of H2S (max H2S concentration is 12.84%), HTHP, near under balance mud weight. (6 Months) 6.Drilling & Completion Fluids Engineer for ConocoPhillips to drill production wells with reservoir drill-in fluid & completed wells w/ reversible completion fluid. (2 Years) 7.Drilling Fluids Engineer for BP HTHP wells / high H2S environment (6 Months)

  • PIC (Person in Charge) on Wellhead Production Platform

    at Joint Venture of BP and CNOOC

    October 2003 - July 2004

    Tianjin Shi

    Develop operator procedures for normal operation, start-up or shut-down of unit •Participate in safety audits and programs and provide emergency response when required •Ensure adherence to safety and environmental regulations •Rotate between different processing units during shift cycles •Work in a team with shared supervisory responsibilities and participate in training other workers. Be cross-trained in a skilled trade and work in the trade during shift cycle •Initiate and review work permit systems (Hot Work, Cold Work, Electrical Work, Isolation Certificate, Confined Space Entry). •Strong hazard identification awareness (Chemical MSDS, working site hazards identification). •working skills working skills: side step/walking, smart fingers, carrying load, 3-points supporting, slip & fall). •Always compliance with PPE requirements to prevent from occupational illness. •Environmental Protection Awareness: ISO14001 Standard & HSE Training; Produced Water Quality Test

  • Offshore Crude Oil Production Process Operator

    at Joint Venture of BP and CNOOC

    August 2001 - September 2003

    Guangdong Sheng

    •Operate electronic or computerized control panel from a central control room to monitor and optimize physical and chemical processes for crude oil and produced water processing units such as heat exchangers, separators, EDD (Electrical Desalination Dehydrator), transfer pumps, produced water surge tanks, hydrocyclone, flare system, nitrogen generators. •Control process start-up, shut-down and troubleshooting •Monitor outside process equipment and record production log in accuracy •Adjust equipment, valves, pumps and controls and process equipment and perform the preventive maintenance to the production equipment. •Authorize or co-sign maintenance work orders •Shut down, isolate and prepare process units or production equipment for maintenance •Sample products, perform tests, record data, carry out statistical process control on process operations, and write production logs •Develop operator procedures for normal operation, start-up or shut-down of unit

Education

  • Bachelor Degree

    at Wuhan Institute of Technology

    2004 - 2007 (3 years) Hubei Sheng

  • Associate Degree

    at Chengde Petroleum College

    1998 - 2001 (3 years) Hebei Sheng

Languages

  • English Negotiation

  • Chinese Native

Followers (2)

Hives